Coogee Bikes Initial Setup

Ebike Setup Instructions for a Smooth Coogee Bikes Start

Just received your Coogee Bike? Learn how to unlock it and follow our assembly video to get riding safely in minutes.

Important Tip When Inflating the Tires

One of the most common causes of pinched inner tubes is inflating the tire while the bike is resting on the kickstand. When the bike is tilted, the wheel may not sit perfectly straight, which can prevent the tire and inner tube from aligning correctly on the rim.

Before inflating the tire, make sure the tire bead is evenly seated around the rim and the inner tube is properly aligned. If the tire or tube is misaligned during inflation, uneven pressure can cause the inner tube to become pinched against the rim and eventually burst.

For this reason, we recommend inflating the tires with the bike perfectly vertical. Alternatively, you can flip the bike upside down to remove pressure from the tires while inflating, which helps ensure the tire and tube seat correctly on the rim.


Important: Record Your Bike's Serial Number

For your records, we recommend taking a clear photo and securely keeping a copy of your bike's serial number, which can be found on the bike frame. The serial number may be required for police reports, insurance claims, warranty support, or proof of ownership if your bike is ever lost or stolen.

EXPLORER, DRIFTER, & NOva 2.0+

Please follow the video instructions for the Explorer, Drifter and Nova 2.0.

Please note that for all models equipped with an NFC key, the key must be tapped on the screen to start the bike.



Front Rack Assembly Video

Our e-bikes can be unlocked for off-road use only. Please note that by law, the maximum allowed speed on public roads is 25 km/h.

To unlock the speed:

Press the power button to turn the display on.

  1. Hold plus (+) and minus (–) together.

  2. Press the power button again until you see a large number 4 on the screen.

  3. Press plus (+) and enter the code 1111.

  4. Once the code is entered, hold the power button.

  5. You can now adjust and set your desired speed.

To unlock the throttle:

  1. Follow the exact same procedure as above.

  2. When you reach the settings page, scroll until you see a large number 06.

  3. Set the small number to 02.

  4. Confirm and exit — your throttle is now unlocked.

CRUISER - DUAL BATTERY +

Please follow the video instructions for the Cruiser Dual.

Please note that for all models equipped with an NFC key, the key must be tapped on the screen to start the bike.



Front Rack Assembly Video

Our e-bikes can be unlocked for off-road use only. Please note that by law, the maximum allowed speed on public roads is 25 km/h.

To unlock the speed:

  1. Press the power button to turn the display on.

  2. Hold plus (+) and minus (–) together.

  3. Press the power button again until you see a large number 4 on the screen.

  4. Press plus (+) and enter the code 1111.

  5. Once the code is entered press plus (+) and minus (–) to set the speed then hold the power button.

  6. You can now adjust and set your desired speed.

To unlock the throttle:

  1. Follow the exact same procedure as above.

  2. When you reach the settings page, scroll until you see a large number 06.

  3. Set the small number to 02.

  4. Confirm and exit — your throttle is now unlocked.

CRUISER MINI +

To unlock the throttle:

  1. Double tap the ON button until you access the settings.

  2. Keep tapping the ON button until you access the settings.

  3. When you see P1, tap plus (+) until you reach P6, then press ON.

  4. Set the value to 2.

  5. Press ON to confirm.

BLADE +

Please follow the video instructions for the Blade.

Please note that for all models equipped with an NFC key, the key must be tapped on the screen to start the bike.



BLADE PRO +

HALO +